![]() ![]() ![]() "Allow return traffic from for SUSPENDED CLIENTS" \ĭisabled=yes src-address=154.0.160.114 src-address-list=SUSPENDED_CLIENTS Protocol=udp src-address=192.168.101.0/24Īdd action=accept chain=forward comment="Allow DNS for SUSPENDED CLIENTS" \ĭisabled=yes dst-port=53 protocol=udp src-address-list=SUSPENDED_CLIENTS Protocol=tcp src-address-list=MYDOMAIN-ADMINĪdd action=accept chain=forward comment=\ "Accept all inboud connections from this routers IP (For the Dude)" \Īdd action=accept chain=input comment="Accept OpenVPN connections" dst-port=\Īdd action=accept chain=input dst-port=1723 in-interface=NBN-GW1 protocol=tcpĪdd action=accept chain=input in-interface=NBN-GW1 protocol=greĪdd action=accept chain=input dst-address=192.168.101.0/24 dst-port=8291 \ Set allow-remote-requests=yes servers=192.168.101.220Īdd action=passthrough chain=unused-hs-chain comment=\ "Limit 20MB" owner=admin transfer-limit=10240B upload-limit=20480B \Īdd name=ftp policy="ftp,!local,!telnet,!ssh,!reboot,!read,!write,!policy,!tes\ "Limit 10MB" owner=admin transfer-limit=10024B upload-limit=10024B \Īdd address-list="" download-limit=20480B group-name="" ip-pool="" name=\ Own-routers,own-users,own-profiles,own-limits,config-payment-gwĪdd name=RADIUS name-for-users="" override-shared-users=off owner=admin \Īdd address-list="" download-limit=10024B group-name="" ip-pool="" name=\ Set supplicant-identity=MikroTikĪdd dns-name= hotspot-address=10.0.50.254 \ Any help you guys can provide would be much appreciated!Īdd interface=bridge1 name="vlan20 - MOBILES" vlan-id=20Īdd interface=bridge1 name="vlan50 - HOTSPOT" vlan-id=50 I have put my config in below and removed some of the sensitive / private information. resetting the HTML pages, clearing the DNS cache and then ensuring that everything resolves as it should etc. My issue is different in that that I do not get the authentication page, but like I said, if I manually enter the URL or IP of the hotspot I get the login page, I am able to authenticate and everything works as it should. ![]() ![]() I am fairly confident that those posts are relating to "after successful authentication". I have read about using HTTPS and have tried all the suggestions including using a certificate and this makes no difference. Just not sure why the redirection is going to the URL instead of my login.html? If I enter the URL of the hotspot I get the login screen and I am able to log in and authenticate against RADIUS so everything works. Everything works, but for some reason when you connect to the wireless network on VLAN 50, the browser automatically opens as it should, but instead of going to the hotspot login page it redirects to and then immediately on to msn.com. I have configured a new hotspot on a VLAN (VLAN50) running on a CCR. I had this problem once before and I know I resolved it, I just cannot recall how! I have configured many MT hotspots over the years and I am a fairly advanced user of MT and Networking in general. I am hoping you can jog my memory please. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |